Allen Bradley 1746-OBP8

Allen Bradley 1734-IE8C module is usually installed on the Allen Bradley chassis and used with other modules (such as digital input and output modules, communication modules, etc.). Configuration can be completed through Allen Bradley programming software (such as RSLogix 5000) to set parameters such as input type and range. All Hanyite products are genuine, reliable in quality and excellent in performance. We provide comprehensive after-sales service, so you can use it without worries! Welcome to contact us.

Application:

Industrial Automation: In the manufacturing and processing industries, the Allen Bradley 1746-OBP8 can monitor and precisely control various production parameters such as temperature, pressure and flow in real time, helping users optimize the production process and improve production efficiency and product quality.

Power Systems: In power generation, transmission and distribution systems, it monitors parameters such as current and voltage.

Smart Buildings: In building automation systems, the 1746-OBP8 controls and monitors heating, ventilation and air conditioning (HVAC), lighting and other systems.

Notes:

Ensure that the input type of the Allen Bradley 1746-OBP8 matches the output type of the field device.

Before wiring, be sure to turn off the power supply and make sure that the grounding protection is done.

Check the operating status of the module regularly to ensure that it is working properly.

FAQ：

What do the LED indicators mean?

The Allen Bradley 1746-OBP8 is equipped with LED indicators to display the module status and the output status of each channel. For example, a green LED usually indicates that the channel is working properly, while a red LED may indicate a fault. Please refer to the module manual for the specific meaning.

What module does it replace?

According to Allen-Bradley's product updates, the 1746-OBP8 may be replaced by a newer module, such as the corresponding module in the ControlLogix series or the CompactLogix series. The specific replacement module needs to be determined according to the actual application requirements.

How to connect to the SLC 500 PLC?

The 1746-OBP8 is connected to the SLC 500 PLC through the backplane (Chassis). Insert the module into the corresponding slot of the backplane, and communicate and transmit data through the connector on the backplane.